Reset

Peel & Stick Foam Panels - 12pk Peel & Stick Foam Panels - 12pk
Trak18 Peel & Stick Foam Panels - 12pk $158.00
Trak18 Wall Foam Panels are polyurethane impact tiles built for the strip of wall to the left and right of an impact screen — where stray shots tend to land. The foam is firm enough to soak up repeated ball strikes without compressing flat, so balls deaden into the surface instead of bouncing back into the bay. Impact protection. The dense foam swallows ball energy on contact, protecting drywall, framing, and finish trim from the marks and dents that come with months of use. Bevelled edges on all four sides give a clean tiled installation without exposed raw foam. Strike noise. The same density that absorbs impact also takes the edge off the sharp slap of a ball hitting a hard wall — quieter sessions in shared spaces and basement bays. Self-adhesive backing. Peel the liner, press the panel to the wall. No spray adhesive, no fasteners, no curing time. Peels off cleanly when you reconfigure the bay. Installation. Trim with a sharp utility knife for outlets, vents, or non-rectangular openings. Best on clean, dry, painted drywall or sealed concrete. Shipped in black, 12 panels per bundle — full quantitative specs in the table below.   Specs SKU: TRAK-WFP Dimensions: 19.69 × 19.69 × 1.97 in (per panel · bundle of 12) Bundle: 12 panels Coverage: ~32.3 sq ft per bundle Density: 30 kg/m³ Material: Polyurethane impact foam Edge profile: Bevelled, 4 sides Backing: Self-adhesive Colour: Black Origin: Imported
Trak18 Premium High-Contrast raw screen material — front and back layers, cut edge Trak18 Premium High-Contrast raw screen material — high-contrast projection weave
Trak18 Raw Premium High-Contrast Impact Screen Material – 126″ Wide (Cut by the Foot) $61.99
Trak18 Premium High-Contrast Raw Impact Screen Material – 126″ Wide, Cut by the Linear Foot Build your golf simulator screen exactly to size with Trak18 Premium High-Contrast Raw Impact Screen Material — a 3 mm high-contrast projection weave tuned for deeper blacks and richer colour, sold raw by the linear foot at the full 126″ (10.5′) roll width. It's the same fabric used in the finished Trak18 Premium High-Contrast Golf Impact Screen, just uncut so you can finish it your way. Speed-rated to 250 MPH and built to absorb thousands of strikes without losing surface quality. How to Order – Simple Linear-Foot Pricing Set your length with the Linear Foot Selector above. Pricing is per linear foot, from 5 to 20 ft, cut as one continuous piece. Standard orientation: 126″ (10.5′) wide × your chosen length — e.g. 10 ft = 126″ W × 120″ H Rotated orientation: turn the material 90° for ultra-wide bays — e.g. 15 ft = 180″ W × 126″ H Custom lengths: order exactly what your enclosure needs High-Contrast Projection Surface Deeper blacks & richer colour for dramatically improved image pop, even in partially lit rooms HDR-friendly — makes high-lumen and HDR projectors look their best Noise-dampening center layer softens ball impact for quieter play UV-, weather-, and tear-resistant build won't fade or fray through thousands of strikes Raw Edges – Finish It Your Way Shipped with no edge finishing, grommets, or pockets, giving fabricators and DIY builders complete control: hem, sew, grommet, Velcro, or mount to any frame. Want it ready to hang? See the finished Trak18 Premium High-Contrast Golf Impact Screen. Edge / Production-Line Guidance Faint production guide lines roughly 0.5″–1″ from each roll edge are a normal part of industrial weaving. Trim or hem at least 1″ inward on each side and position grommets at least 1.5″ from raw edges; effective projection width is approximately 124″ after trim. Technical Specifications Material: 3 mm high-contrast multi-layer projection weave Roll width: 126″ (10.5′) — full, seamless width Sold by: linear foot (5–20 ft), continuous cut Speed rating: 250 MPH golf-ball tested Optics: high-contrast surface — deeper blacks, richer colour Acoustics: noise-dampening center layer Durability: UV-, weather-, and tear-resistant Projection: HD, 4K, standard- and ultra-short-throw compatible Edge style: raw / unfinished (finished screens available) Use: indoor golf simulators, ambient-light rooms, custom enclosures
Close-up of white fabric texture Close-up of white fabric on a black background
Trak18 Raw Premium Impact Screen Material – 126″ Wide (Cut by the Foot) $54.99
Trak18 Premium Raw Impact Screen Material – 126″ Wide, Cut by the Linear Foot Build your golf simulator screen exactly to size with the Trak18 Premium Raw Impact Screen Material — the same 3 mm multi-layer projection weave used in Trak18's finished, ready-to-hang flagship screens, now sold raw by the linear foot at the full 126″ (10.5′) roll width. Speed-rated to 250 MPH, it's engineered to absorb thousands of strikes while holding a crisp, projection-ready surface — ideal for DIY builders, fabricators, and professional installers who want full control over finishing. How to Order – Simple Linear-Foot Pricing Set your length with the Linear Foot Selector above. Pricing is per linear foot, from 5 to 20 ft, cut as one continuous piece. Standard orientation: 126″ (10.5′) wide × your chosen length — e.g. 10 ft = 126″ W × 120″ H Rotated orientation: turn the material 90° for ultra-wide bays — e.g. 15 ft = 180″ W × 126″ H Custom lengths: order exactly what your enclosure needs Same Premium Fabric as Trak18 Finished Screens This is the identical 3 mm multi-layer impact textile found in the grommeted, ready-to-hang Trak18 Premium Golf Impact Screen — just raw and uncut so you can finish it your way: Ultra-smooth projection surface for sharp HD, 4K, and ultra-short-throw images with minimal hotspotting Accurate colour and contrast across GSPro, E6 Connect, TGC, and all major sim platforms 250 MPH speed-rated multi-layer build that absorbs repeated driver impacts without degrading Engineered Multi-Layer Construction Noise-dampening center layer softens ball impact for quieter, more enjoyable play UV-resistant surface won't fade under continuous projector light Weather-resistant for climate-controlled garages and dedicated simulator rooms Tear-resistant edges maintain structural integrity through thousands of high-velocity strikes Raw Edges – Finish It Your Way Shipped with no edge finishing, grommets, or pockets, giving builders complete creative control: Hem, sew, grommet, Velcro, or mount to any frame or enclosure Works with standard sewing equipment and tools Want it ready to hang? Trak18 also offers finished screens with grommets and edge finishing — see the finished Trak18 Premium Golf Impact Screen. Edge / Production-Line Guidance Faint production guide lines roughly 0.5″–1″ from each roll edge are a normal part of industrial weaving: Trim or hem at least 1″ inward on each side Position grommets/fasteners at least 1.5″ from raw edges Effective projection width is approximately 124″ after edge trim Technical Specifications Material: 3 mm multi-layer polyester projection weave Roll width: 126″ (10.5′) — full, seamless width Usable width: ~124″ after 1″ edge trim each side Sold by: linear foot (5–20 ft), continuous cut Speed rating: 250 MPH golf-ball tested Acoustics: noise-dampening center layer Durability: UV-, weather-, and tear-resistant Projection: HD, 4K, standard- and ultra-short-throw compatible Edge style: raw / unfinished (finished screens available) Colour: neutral white for accurate colour reproduction Use: indoor golf simulators, custom enclosures, professional installations
Trak18 Premium XL raw impact screen material — projection weave texture Trak18 Premium XL raw impact screen material — fabric close-up
Trak18 Raw Premium XL Impact Screen Material – 126″ Wide (Cut by the Foot) $57.99
Trak18 Premium XL Raw Impact Screen Material – 126″ Wide, Cut by the Linear Foot Build your golf simulator screen exactly to size with Trak18 Premium XL Raw Impact Screen Material — a heavier 3.5 mm multi-layer projection weave built for commercial and high-traffic bays, sold raw by the linear foot at the full 126″ (10.5′) roll width. It's the same fabric used in the finished Trak18 Premium XL Golf Impact Screen, just uncut so you can finish it your way. Speed-rated to 250 MPH, the thicker weave dissipates even more impact energy for quieter, longer-lasting play. How to Order – Simple Linear-Foot Pricing Set your length with the Linear Foot Selector above. Pricing is per linear foot, from 5 to 20 ft, cut as one continuous piece. Standard orientation: 126″ (10.5′) wide × your chosen length — e.g. 10 ft = 126″ W × 120″ H Rotated orientation: turn the material 90° for ultra-wide bays — e.g. 15 ft = 180″ W × 126″ H Custom lengths: order exactly what your enclosure needs Engineered Multi-Layer Construction Heavier 3.5 mm weave dissipates more ball energy than a standard screen for quieter, longer-lasting impact Noise-dampening center layer softens ball impact for more enjoyable play UV-resistant surface won't fade under continuous projector light Weather-resistant for climate-controlled garages and dedicated simulator rooms Tear-resistant edges maintain integrity through thousands of high-velocity strikes Raw Edges – Finish It Your Way Shipped with no edge finishing, grommets, or pockets, giving fabricators and DIY builders complete control: hem, sew, grommet, Velcro, or mount to any frame. Want it ready to hang? See the finished Trak18 Premium XL Golf Impact Screen. Edge / Production-Line Guidance Faint production guide lines roughly 0.5″–1″ from each roll edge are a normal part of industrial weaving. Trim or hem at least 1″ inward on each side and position grommets at least 1.5″ from raw edges; effective projection width is approximately 124″ after trim. Technical Specifications Material: 3.5 mm multi-layer polyester projection weave Roll width: 126″ (10.5′) — full, seamless width Sold by: linear foot (5–20 ft), continuous cut Speed rating: 250 MPH golf-ball tested Acoustics: noise-dampening center layer Durability: UV-, weather-, and tear-resistant Projection: HD, 4K, standard- and ultra-short-throw compatible Edge style: raw / unfinished (finished screens available) Use: commercial & high-traffic indoor golf simulators, custom enclosures
Trak18 Ecofelt acoustic wall and ceiling panel for golf simulators – front angle Trak18 Ecofelt acoustic wall and ceiling panel for golf simulators – bevelled felt detail
Trak18 Trak18 Ecofelt Acoustic Wall & Ceiling Panels for Golf Simulators – 12-Pack $399.00
Trak18 Ecofelt Acoustic Wall & Ceiling Panels – Quieter, Better-Protected Golf Simulator Rooms Trak18 Ecofelt Wall & Ceiling Panels are 24" recycled-PET acoustic tiles made for the two problems every golf simulator room has: harsh echo from bare walls, and stray balls that mark up drywall or ricochet around the bay. Each bundle includes 12 black panels covering roughly 46.5 sq ft. Acoustic Panels That Tame Simulator Echo Every strike off the face and into the screen bounces around a hard-surfaced room. The dense Ecofelt absorbs much of that mid- and high-frequency slap-back, so your simulator sounds less like an echo chamber and more like a finished room – especially on the wall directly behind the screen. Impact Protection for Walls and Ceilings The felt face softens shots that miss the screen and its edges, shielding wall and ceiling finishes from scuffs, marks and ball damage. For a fully protected bay, pair the panels with Trak18 Edge Guard or Trak18 Edge Carpet around the screen perimeter. Panel size: 23.62" × 23.62" × 1/2" (600 × 600 × 12 mm) Bundle: 12 panels Coverage: approx. 46.5 sq ft per bundle Material: Recycled PET acoustic felt Density: 141 kg/m³ Edges: Bevelled on all four sides for a clean, tiled look Colour: Black Easy Wall or Ceiling Installation Mount the panels with construction adhesive for most installs, or use mechanical fasteners. Ecofelt cuts cleanly with a sharp utility knife or jigsaw, so trimming around outlets, vents, beams and other openings is simple. Cover an entire wall, create a feature panel behind the screen, or line the ceiling above the hitting area – a smart upgrade for low-ceiling basements and garages. Complete Your Golf Simulator Protection Trak18 Edge Guard – slim 9" impact-rated fabric trim for the screen perimeter. Trak18 Edge Carpet – 1/2" thick heavy-duty edge protection in 8", 10" or 12" widths. Trak18 Ball Bungees (50-Pack) – heavy-duty bungees for even screen tension. Shop our golf impact screens and golf simulator enclosure kits. Perfect for Golf Simulators Ideal for home golf simulators, garage and basement builds, training bays and golf studios, Trak18 Ecofelt panels make your space quieter, safer and better looking – one bundle at a time.
Trak18 Edge Carpet golf simulator screen edge protection – front view Trak18 Edge Carpet golf simulator screen edge protection – full-length strip
Trak18 Trak18 Edge Carpet – 1/2" Heavy-Duty Golf Simulator Screen Edge Protection from $91.00
Trak18 Edge Carpet – Heavy-Duty Edge Protection for Golf Simulator Impact Screens The Trak18 Edge Carpet is a 1/2" thick, impact-rated weave that lines the perimeter of your golf simulator impact screen and seals the gap to the wall. It fastens to the screen's velcro edges with hook-and-loop backing, absorbing off-centre shots before they can damage drywall, trim or framing. Designed and made in Canada. Thicker, Quieter Screen Edge Protection Built to Last Edge Carpet is the heavier-duty of Trak18's two screen edge protection options. The thicker weave deadens the sound of perimeter strikes and stands up to more abuse than lighter trim – a smart choice for busy home simulators, garage bays that see daily use and commercial golf studios. Thickness: 1/2" Widths: 8", 10" or 12" Lengths: 7 ft to 17 ft in 1 ft increments Face: Impact-rated carpet weave Attachment: Hook-and-loop (velcro) backing – mounts to the velcroed edges of your screen Protects: Walls, ceilings and framing from scuffs, ball marks and impact damage Origin: Made in Canada Choosing the Right Width and Length Go wider where the gap between the screen and wall is larger or where you expect the most mis-hits – often the top edge and the side nearest the hitter. Pick one width and length per strip, and add the strips you need for each side and the top. Sizing tip: order each strip 3–6" longer than the edge it covers so the pieces overlap neatly at the corners – no exposed frame and a cleaner finish. Edge Carpet or Edge Guard – Which Should You Choose? Trak18 Edge Carpet – 1/2" thick, heavy-duty and quieter on strikes; best for high-use bays and maximum protection. Trak18 Edge Guard – a slimmer 9" impact-rated fabric trim; best for a clean look and tight clearances. Complete Your Golf Simulator Protection Trak18 Ecofelt Acoustic Wall & Ceiling Panels – absorb echo and stray shots on the walls and ceiling around your screen. Trak18 Ball Bungees (50-Pack) – heavy-duty bungees for even screen tension. Shop our golf impact screens and golf simulator enclosure kits. Perfect for Golf Simulators From home golf simulators in basements and garages to commercial training bays and golf studios, Trak18 Edge Carpet frames your screen with durable, sound-dampening protection that keeps the room behind it looking new.
Trak18 Edge Guard golf simulator screen edge protection – front view Trak18 Edge Guard golf simulator screen edge protection – hook-and-loop backing detail
Trak18 Trak18 Edge Guard – 9" Impact-Rated Golf Simulator Screen Edge Protection from $52.50
Trak18 Edge Guard – Low-Profile, Impact-Rated Edge Protection for Golf Simulator Screens The Trak18 Edge Guard is a 9" wide strip of impact-rated fabric that seals the gap between your golf simulator impact screen and the wall behind it. Its hook-and-loop backing presses straight onto the screen's velcro edges, so shots that clip the perimeter hit fabric instead of drywall, trim or framing. Designed and made in Canada. Slim Screen Edge Protection for Tight Golf Simulator Builds Edge Guard is the lighter, slimmer of Trak18's two screen edge protection options. Choose it when you want a crisp, finished border around the screen, or when clearance is limited – a common situation in basement and garage golf simulators with low ceilings and narrow hitting bays. Width: 9" Face: Impact-rated fabric that deflects stray strikes Attachment: Hook-and-loop (velcro) backing – mounts to the velcroed edges of your screen Lengths: 7 ft to 17 ft in 1 ft increments Protects: Wall finish, trim and framing from scuffs, ball marks and impact damage Origin: Made in Canada Tool-Free Installation After the Screen Is Hung Hang your impact screen first, then press Edge Guard onto the velcro along each side and across the top, pulling it snug so it closes the gap to the wall. No screws, no tools. Sizing tip: order each strip 3–6" longer than the edge it covers so the pieces overlap neatly at the corners – no exposed frame and a cleaner finish. Edge Guard or Edge Carpet – Which Should You Choose? Trak18 Edge Guard – thinner and lighter, quick to install; best for a clean trim line and tight clearances. Trak18 Edge Carpet – a 1/2" thick heavy-duty weave in 8", 10" or 12" widths; quieter on strikes and built for longer life in high-traffic bays. Complete Your Golf Simulator Protection Trak18 Ecofelt Acoustic Wall & Ceiling Panels – absorb echo and stray shots on the walls and ceiling around your screen. Trak18 Ball Bungees (50-Pack) – heavy-duty bungees for even screen tension. Shop our golf impact screens and golf simulator enclosure kits. Perfect for Golf Simulators Whether you're finishing a home golf simulator, a garage or basement build, a commercial training bay or a golf studio, Trak18 Edge Guard gives your screen a tidy, professional border while protecting the room behind it from mis-hits.
Trak18 Heavy-Duty Ball Bungees for Golf Impact Screens – 50-Pack Trak18 Heavy-Duty Ball Bungees for Golf Impact Screens – 50-Pack
Trak18 Trak18 Heavy-Duty Ball Bungees for Golf Impact Screens – 50-Pack from $20.00
Trak18 Ball Bungees – Heavy-Duty Tensioning for Golf Simulator Impact Screens Trak18 Ball Bungees are heavy-duty ball-end bungee cords made for tensioning golf simulator impact screens. A tight, evenly tensioned screen gives you a flatter projection surface, more consistent ball rebound and less sag over time. Sold in packs of 50, in 6" and 10" lengths. Built for Daily Golf Simulator Use Each bungee combines UV-resistant rubber with zinc-plated steel hooks, so it holds its tension season after season instead of stretching out – even in garages and basements that see swings in temperature and humidity. Lengths: 6" or 10" Pack size: 50 bungees Cord: UV-resistant rubber Hooks: Zinc-plated steel Use: Impact screen tensioning on enclosure and DIY frames Origin: Made in Canada 6" or 10" – Which Length Do You Need? 6" Ball Bungees – for builds where the screen sits close to the frame and you want a tight, low-profile connection. 10" Ball Bungees – for wider gaps between the screen grommets and the frame, or where you want more stretch and travel for absorbing impact. Many builds use one length throughout; if you're replacing bungees, match the length that came with your screen or enclosure. Complete Your Golf Simulator Setup Trak18 Edge Guard – slim 9" impact-rated fabric trim for the screen perimeter. Trak18 Edge Carpet – 1/2" thick heavy-duty edge protection in 8", 10" or 12" widths. Trak18 Ecofelt Acoustic Wall & Ceiling Panels – absorb echo and stray shots around your screen. Shop our golf impact screens and golf simulator enclosure kits. Perfect for Golf Simulators Whether you're hanging a new screen in a home golf simulator, refreshing a garage or basement build, or maintaining screens in a training bay or golf studio, Trak18 Ball Bungees keep your impact screen tight, flat and ready to play.
Trak18 Premium Golf Impact Screen – 4K-Ready, 250 MPH Rated Close-up of white fabric on a black background
Trak18 Trak18 Premium Golf Impact Screen – 4K-Ready, 250 MPH Rated from $650.18
The Trak18 Premium Golf Impact Screen is a pro-grade golf simulator screen engineered for serious players, coaches, and commercial facilities. Built from a dense, multi-layer textile with an ultra-tight projection weave, this premium golf impact screen delivers tour-level realism, sharper 4K visuals, and quieter, safer ball impact — session after session. Why Trak18 Is the Best Golf Impact Screen for Serious Players Ultra-clean image reproduction — precision-woven projection surface delivers sharp HD and 4K-ready visuals with deep colour and even uniformity, so your golf simulator screen looks tour-broadcast crisp. Controlled impact absorption — multi-layer construction dissipates ball energy, minimizing rebound and reducing acoustic impact for a safer indoor golf bay. 250 MPH speed-rated — engineered and tested for the fastest swings in the game, making Trak18 a true commercial golf simulator screen. Light management by design — the dense fabric structure limits light bleed-through for consistent image clarity in both dark and partially lit rooms. Built for longevity — withstands thousands of repeated strikes while maintaining tension, surface quality, and structural integrity. Engineered for True Simulator Performance Every Trak18 indoor golf screen is constructed from a multi-layer textile system with an ultra-tight projection weave. That structure is what separates a hobby screen from a serious one: it maximizes image sharpness while efficiently absorbing ball energy — reducing bounce-back, lowering impact noise, and creating a safer, more realistic hitting environment. Pair it with a short throw projector for the sharpest possible image. Sizes to Fit Any Simulator Bay Choose from a full lineup of standard sizes — including 8'×10', 8'×12', 8'×14', 8.5'×11.5', 8.5'×15', 9'×12', 9'×14', 9'×16', 9.5'×12.5', and 10'×13' — designed to match the most common simulator room dimensions and projector aspect ratios. Need a custom size? Email contact@golfmyspace.com and we'll build a golf hitting screen to your exact spec. Professional-Grade, Purpose-Built Every Trak18 Premium Impact Screen is precision-fabricated and inspected to meet demanding performance standards. Whether installed in a private home golf simulator, teaching studio, or high-traffic commercial bay, Trak18 delivers a refined finish and reliable performance session after session. Why Buy from Golf My Space (Canada) Trak18 is our in-house brand — designed, tested, and shipped from Canada. When you buy direct, you get local support, faster shipping within Canada, and access to our custom enclosure and projector packages for a complete golf simulator setup. Trak18 — engineered for serious golfers, built for real swings.
Trak18 Premium High-Contrast golf impact screen — high-contrast projection surface Trak18 High-Contrast impact screen — grommet corner detail
Trak18 Trak18 Premium High-Contrast Golf Impact Screen – 4K-Ready, 250 MPH Rated from $703.18
The Trak18 Premium High-Contrast Golf Impact Screen is a pro-grade golf simulator screen tuned for stunning, high-contrast visuals — deeper blacks, richer colour, and sharper image pop in any lighting. Built from the same 3 mm multi-layer textile and ultra-tight projection weave as our flagship Premium, with a high-contrast surface ideal for rooms with ambient light or HDR-capable projectors. Why Choose the High-Contrast Impact Screen High-contrast projection surface — deeper blacks and dramatically improved image pop for a more immersive, true-to-life picture. Performs in ambient light — tighter contrast keeps the image punchy even in partially lit rooms, not just blacked-out studios. 4K-ready clarity — precision-woven surface delivers sharp HD and 4K visuals with dialled-in colour uniformity. 250 MPH speed-rated — engineered and tested for the fastest swings, with multi-layer construction for minimal bounce-back. Noise-dampening & durable — a sound-dampening center layer plus a UV-, weather-, and tear-resistant build hold up to thousands of strikes without fading or fraying. Engineered for True Simulator Performance The high-contrast weave is built to make HDR and high-lumen projectors look their best — richer colour, deeper shadow detail, and a more cinematic picture — while still absorbing ball energy for quieter, safer play. Pair it with a short throw projector for the sharpest possible image. Sizes to Fit Any Simulator Bay Choose from 21 standard sizes across 4:3, 16:9, 16:10, and 1:1 aspect ratios, designed to match the most common simulator room dimensions and projector formats. Need a custom size? Visit Trak18's Screen Builder Prefer to Build It Yourself? Get the same high-contrast fabric uncut and sold by the linear foot with our Raw Premium High-Contrast Impact Screen Material — ideal for DIY frames and custom enclosures.
Trak18 Premium XL golf impact screen — grommet corner detail Trak18 Premium XL impact screen fabric close-up
Trak18 Trak18 Premium XL Golf Impact Screen – 4K-Ready, 250 MPH Rated from $669.18
The Trak18 Premium XL Golf Impact Screen is our heavy-duty golf simulator screen — a thicker 3.5 mm multi-layer textile built for high-rep commercial bays, teaching studios, and serious home setups. It carries the same ultra-tight projection weave and tour-level 4K clarity as our flagship Premium, with even more impact energy absorbed on every strike for quieter, safer play. Why Choose the Premium XL Impact Screen Thicker 3.5 mm construction — the heavier multi-layer weave dissipates more ball energy than a standard screen, further reducing rebound and impact noise. Ultra-clean 4K image — precision-woven projection surface delivers sharp HD and 4K-ready visuals with deep colour and even uniformity. 250 MPH speed-rated — engineered and tested for the fastest swings, ideal as a commercial golf simulator screen. Noise-dampening & durable — a sound-dampening center layer plus a UV-, weather-, and tear-resistant build hold up to thousands of strikes without fading or fraying. Light management by design — the dense fabric limits light bleed-through for consistent image clarity in dark or partially lit rooms. Built for High-Traffic, Commercial-Grade Use The extra 0.5 mm over our 3 mm Premium screen puts more material between the projector image and the ball — translating to a longer service life in busy commercial bays and teaching studios. Pair it with a short throw projector for the sharpest possible image. Sizes to Fit Any Simulator Bay Choose from 21 standard sizes across 4:3, 16:9, 16:10, and 1:1 aspect ratios, designed to match the most common simulator room dimensions and projector formats. Need a custom size? Visit Trak18's Screen Builder Prefer to Build It Yourself? Get the same 3.5 mm fabric uncut and sold by the linear foot with our Raw Premium XL Impact Screen Material — ideal for DIY frames and custom enclosures.

FREE SHIPPING ACROSS 🇨🇦

We deliver across all of Canada for free on orders above $100!

WORLD-CLASS SUPPORT

We'll answer all of your questions. No obligations! Just friendly Canadian support!

GIFT CARDS

Give the gift of freedom. Contact us for more details!